Our RAFFAELLO model is very exclusive and is made on request only. It is a symmetrical design with double midtweeter and double woofer at the sides of the central supertweer. This is making a total width of 0.85m (33.5″) each channel with a total height of 2.03m (80″), a weight of 180Kg (400lb) per channel excluding crossovers and a total woofer surface of about 1.7 sqm (19sqft) on the two channels.

The symmetrical design brings better interaction with room walls and better imaging.

Also double transducers allow higher dynamics and resolution.

It is possible to add subwoofer panels, same as CARAVAGGIO.

It comes with 2 separate acrylic passive crossovers using an exclusive topology, connecting cables between crossover and speaker are included. These are XX quality as standard, dimensions 680x450x130mm weight 50Kg each including transparent acrylic base.

High sensitivity of up to 98dB makes possible to use virtually any amplifier.

It is recommended for rooms bigger than 50sqm (550sqft) and wider than 5.5m (18ft).

RAFFAELLO

Speaker heigth：2030 mm

Baffle width：850 mm 

Room minimum recommended width：5  m    

Baffle thickness：54  mm    

Woofer, MD, TW and STW height：1.68 mm

Number of Woofers：2    

Woofers width：250*2  mm

Woofers surface：8400 cm2

Woofers max stroke：18 mm

Woofers air volume：15120 cm3

Midrange width：n/a mm

Mid Tweeter width：25*2 mm   

Super Tweeter width：9 mm

Reference sensitivity：97 dB

Crossover Frequencies：750-4500 Hz

Frequency Response：25-40000 Hz

Nominal Impedance：4 Ohm

Weight：180 kg   

All models are offered with single wiring as standard, bi-wiring available on request (except Michelangelo that has bi-wiring as standard)