C5i Integrated Amplifier Features HDR Core is the result of 20+ years of engineering to refine the digital to analog process, and is comprised of 3 major components: Low Noise and Ultra Low Noise Master Clocks, Advanced Asynchronous Interfaces, and Dual Mode Low-Noise High Efficiency Power Supplies. HDR Core technology is fundamental to every e.One DAC and Integrated product, creating the most realistic, open, and defined musical experience possible.

Built In Headphone Output The dedicated low-impedance, high-output headphone amp circuit has been designed to drive high quality headphones with pristine clarity. You’ll be amazed at the musical depth they bring to your headset.

Simple, Elegant Interface Designed to be functional and simple, the dual-functioning one knob interface is a joy to use. The single 4 digit display works with it seamlessly to access all basic functions in a few clicks. The included 36 button infrared remote allows instant command functions and display editing.

Specification

Amplifier Section:
Power Output 1% THD: 120W 4 ohms, 60W 8 ohms per channel
Minimum Load: 3 ohms per channel
Peak Output Current: 30 amperes
Frequency Response: +/-3 dB 1.5Hz-90KHz, 4 ohm load
THD+N: 0.003% 1W, 1KHz, 4 ohms
IMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohms
Output Noise: <50uVRMS A-weighted 10Hz-20KHz Damping factor: >1000
Output Impedance at 100Hz: <8 milliohms
Dynamic Range: 115dB

Digital Inputs:
Maximum Data Input Rate
24bit Data at 192KS/s: SPDIF RCA x2, TOSLINK x2
24bit Data at 96KS/s: USB
Analog Inputs:
Line in impedance: 11 Kohms
Phono in impedance: 47 Kohms//150pF
Phono accuracy: +/-0.5dB, 50Hz-15kHz

General:
Output connections: 2-sets of WBT NextGen Binding Posts, RCA Line Out, Headphone Output
Headphone Output Current and Voltage Level: 300mA peak at 4Vrms
Power On usage: 14W
Power Off usage: 0.0W
Internally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 Hz
Size: 8.5 x 3.5 x 12?, 216 x 88 x 305mm (W x H x D)
Weight: 13lbs, 6.5Kg